Contact Us
TEL: +86-576-81108366
Mobile: +86-13362691788
E-mail: rolly@enamould.com
Address: No.6 Chaoyuan Rd, Industrial North, Huangyan, Taizhou, Zhejiang
Home > Knowledge > Content
How to use the tray mold
May 25, 2018

The correct use of the pallets should be done by packaging the goods on the pallets and adding appropriate bundles and wraps to facilitate the loading, unloading, and transportation of machinery to meet the requirements for handling, transportation and storage.

First, the carrying capacity of the tray:

The weight of each pallet should be less than or equal to 2 tons. In order to ensure the safety during transit, the height of the center of gravity of the loaded cargo should not exceed two-thirds of the width of the pallet.

Second, pallet stacking mode:

According to the type of the goods, the quality of the goods carried on the pallets and the size of the pallets, the stacking method of the goods on the pallets is reasonably determined. The utilization of the carrying surface area of the tray should generally not be less than 80%. There are the following requirements for the stacking of pallet goods:

1. Hard-cube goods such as wood, paper and metal containers are stacked in a single layer or in multiple layers, stretched or shrink film packages;

2, paper or fiber cargo single-storey multi-storey yards, with a cross strap sealing;

3, sealed metal containers and other cylindrical cargo single or multi-layer stacking, wooden cargo cover reinforcement;

4, need to be moisture-proof, waterproof and other protective paper products, textile goods single or multi-layer staggered stacking, stretch or shrink film packaging goods increased angle support, cargo cover partitions and other reinforcement structure;

5. One-way or multi-layer stacking of fragile goods, increase the structure of wooden support partitions;

6. Vertical stacking of metal bottles, cylinders, containers or goods in a single layer, adding a cargo box and slat reinforcing structure;

7, bag cargo multi-layer staggered compaction code.

Third, carry cargo protection and reinforcement:

After the goods carried on the pallets are fixed, they still cannot meet the requirements for transportation. Reinforced protective attachments are made of paper, wood, plastic, metal or other materials.

Fourth, the way of carrying goods:

The methods of fixing the goods carried on the trays include binding, glue binding, stretch packaging, and mutual use.


Previous: Plastic tray molding

Next: Usage and maintenance of plastic trays