Mobile: +86-13362691788
E-mail: rolly@enamould.com
Address: No.6 Chaoyuan Rd, Industrial North, Huangyan, Taizhou, Zhejiang





Brief description of crate box mould: 1.mold base:C45 2.core/cavity:718H 3.runner type: hot runner 4.delivery time: 35 days 1.The series of crate mould we have made 2.Detailed description of the Crate Mould: Basic mould information: There are three levels of mould quality for your option. Option...
Brief description of crate box mould:
1.mold base:C45
2.core/cavity:718H
3.runner type: hot runner
4.delivery time: 35 days
1.The series of crate mould we have made
2.Detailed description of the Crate Mould:
Basic mould information:
Runner Type | Hot Runner, 4 points |
Mould Size | 1080x950x600mm |
Mould Weight | 4120Kg |
No. of Cavity | 1 cavity |
Product Size | 600x400x280mm |
Product Material | HDPE |
Product Weight | 1700g |
Wall thickness | 1.7mm |
Surface finish | polish |
Delivery Time | 35 days |
There are three levels of mould quality for your option.
Option A: Level A quality (Highest Level Quality)
Mould Base: LKM, 45# Steel
Core/Cavity: S136+Becu
Slider/Insert: S136
Mould spare parts: SKD
Hot Runner: YUDO
Mould Life:1,000,000 shots
Cycle Time:40s
Option B: Level B quality (Middle Level Quality)
Mould Base: S50
Core/Cavity: 718H
Slider/Insert: 718H
Mould spare parts: Jinghong, China
Hot Runner: YUDO,China
Mould Life:800,000 shots
Cycle Time:55s
Option C: Level C quality (Lowest Level Quality)
Mould Base: 1045
Core/Cavity: P20
Slider/Insert: P20
Mould spare parts: Jinghong,China
Hot Runner: Hongying,China
Mould Life:5,000,000 shots
Cycle Time:60s
Attention:
Price varies in different quality level. When you send us the mould inquiry, please offer the following information:
1) Quality level you choose: Level A/Level B/Level C
2) Crate Photo
3) Crate Dimension: L*W*H
3. Crate Mould Making Process
Processing | Time |
Prepare Steel | 5 days |
CNC Machining | 10 days |
Precision CNC Machining | 5 days |
Drill | 5 days |
Polishing | 3 days |
Assembling and Fitting | 5 days |
T1 mould test | 2 days |
3.1 DESIGN STAGE | 3.2 MACHINING STAGE |
3.3 Mould Testing |
4. Crate Mould Quality Control
For the Q/C of mould, there are 3 steps:
1.Mould Material Q/C
- Mould Steel Checking(Hardness, flaw detection)
- Mould Standard Spare Parts Checking(hardness, size, flaw checking)
2. Mould Making Process Q/C
- design checking (part design, mould design, mould engineering drawing)
- Each part of mould’s size checking after machining according to 2D drawing
- mould testing(check mould running condition)
3.check with customer’s requirement again before mould shipping.
5.Crate Mould Pack and Shipping
Anti-rust oil is painted first, then Plastic film, and finally Wooden Case.
Sent together with the mould:
a)Mould manual instruction
b)engineering drawing in flash disk
c)one more set of mould spare parts: heater, ejector pin, bush, water nozzle, water pipe, hanging ring.
6. Crate Mould Maintenance
a) When the mould is vacant, spray the anti-rust oil
b) To clean the gate and cooling system regularly
c) Avoid to use recycled material if the mould is suitable for virgin material only
7. After-Sale Service
a) Engineering and one interpreter can be sent to customer’s factory for first running.
b) one-year after-sale technique support